Before & After Photos

This customer was concerned about their falling and cracked driveway, worried it was only going to get worse. Luckily, we were able to protect this homeowner and others from the tripping hazard. To do this, we used PolyLevel, an injectable foam, to lift and stabilize the concrete. Next, we used NexusPro to seal the joints and cracks and ensure that this driveway would survive harsh weather conditions. 

This homeowner was dealing with a repetitively sinking compression guard, creating a trip hazard. The fix the sinking concrete slabs, we used PolyLevel, an injectable foam, to lift the driveway back to its original position. After the PolyLevel, we re-set the compression guard. 

This homeowner was concerned because there was a void in his driveway that was getting worse and causing the car to start sinking into the void while it was parked. After looking into companies to help, he gave us a call.

We sent System Design Specialist Anthony Salcedo to inspect the cause of this sinking concrete and come up with a solution to fix his driveway. Anthony found that the soil underneath the concrete could not hold the weight of the concrete as it was poorly compacted because the soil was backfilled when the home was built. The weak soil underneath the concrete allowed the concrete to sink, so Anthony suggested our team will lift and seal the concrete. Our team utilized PolyLevel Concrete Leveling and NexusPro Cracked Concrete Repair to lift, level, and seal the concrete driveway.

The customer was very happy with the project and he was very excited to be our first customer in Colorado Springs. Check out his newly leveled driveway!

Homeowner Scott was looking to solve his concrete problem as it was providing a trip hazard and problems for drainage. He wanted to add value to his home as well as improve his quality of life. Looking for this long-term solution, he decided to give us a call.

System Design Specialist Anthony Salcedo was able to come up with a solution for both of the homeowner’s problems. Using PolyLevel concrete leveling and NexusPro Joint Sealant, Anthony repaired and leveled the concrete so that there is no longer a trip hazard or poor drainage system at Scott's home.

This homeowner wanted to fix the dip they around the entrance of their garage as well as the dipping front walkway. He was worried that the rest of his concrete would eventually face the same fate of settling, do he knew that he needed to act sooner rather than later. When he found the detailed process of concrete repair to be too much to do on his own, he decided to give us a call to see how we could help lift his concrete burden.

We sent System Design Specialist Jeremy Sund to inspect the homeowner's driveway and front walkway, diagnose the issues facing these, then design a solution fit to fix and protect the concrete surfaces from further damage. Jeremy found that the soil underneath the homeowner's driveway and front walkway was poorly compacted, meaning that the soil was vulnerable to wash out and settlement. He suggested that we utilize our 3-part Concrete Protection System to fix, protect, and prevent further damage to the concrete surfaces, and the homeowner was very excited with this plan.

One of our installation teams came out to the home and started to utilize the 3-Part Concrete Protection System, including PolyLevel Foam to lift the concrete, NexusPro Sealant to seal the cracks and joints of the concrete, and SealantPro to protect the concrete from further damage. The homeowner was extremely happy with these solutions and he noticed that there was no longer a bump as he pulled into his driveway. Check out the before and after of the front walkway!