Before & After Photos

When our team walked into this home through the front door, there was an obvious bounce in the floor. Upon investigation, the floor was being held up by telephone poles that were cut to fit but they were not strong enough to hold keep holding the home up. Also, the floor was not level. The homeowner was concerned about the bounce and the ability of the floor to withstand weight since it was not supported very well. We fixed the problem by adding SmartJacks to the crawlspace to hold up the floor. There are 2 supplemental beams that run the length of the house. We added 5 Smartjacks to the front of the home and 5 more SmartJacks to the back of the home. We also added a supplemental beam in-between the existing cinderblock supports to finish supporting the house/floor from sagging and bouncing.  

Crumbling concrete support blocks were endangering the floor and foundation of this home, and this homeowner needed a solution installed quickly. After performing a thorough inspection of the homes crawl space, we proposed our SmartJack system to restore stability to the home and lift the floors back to their original position. 

The current supports for this home are cinder blocks that are breaking and offer little to no support as the floor began to fall down. They called Thrasher to come out to replace the old support structures with new. We used a smart jack 350 system to stabilize the home and lift the failing floor back up to its original position. 
 

This homeowner had many cracks in his concrete and was worried that his driveway would cave while driving on it. He has worked with Thrasher in the past and was very happy with the results so he called us to help him with the problem. We used our PolyLevel foam system to even out the concrete and then we sealed the joints and cracks using NexusPro. This will make sure his driveway is safe and protected! 

This homeowner has an issue with animals living under the driveway and wanted the voids filled without having to replace the concrete. After taking a look at the issue, we decided to apply our three-part concrete repair solution. This includes PolyLevel to stabilize the concrete, NexusPro to seal the cracks, and SealantPro to protect the concrete from future damage.