Before & After Photos

This Surry, ME, homeowner recently moved into their new home and was quickly introduced to the problems with a wet basement. Water was coming into the basement through the floor and walls during rains. The homeowner wanted to take care of the problem, protect the health of their home, and regain the ability to use the space. The homeowner booked a free estimate with TC Hafford Basement Systems, and System Design Specialist Mark Smith worked with them to design a waterproofing system that would take care of their issues, which included a new Slab with WaterGuard.

Waterproofing The Area

Debris was removed from the basement, and the ground was regraded to prep the area for waterproofing. Drainage Matting was installed to create an inorganic barrier that would channel water to the sump and protect the new slab. WaterGuard was installed around the perimeter and connected to a new TripleSafe Sump Pump. WaterGuard captures and channels water to the TripleSafe, which features two Zoeller sumps and a battery-powered backup. The TripleSafe drains water out of the basement and through an Exterior Buried Discharge line that is protected against ice buildup with IceGuard. CleanSpace Wall System was installed to act as a vapor barrier where needed and channel any additional moisture from the walls to the WaterGuard.

New Slab and SprayFoam

Now that the area was fully prepped and waterproofed, the new slab was ready to be poured. The new slab turned the space into an area that the homeowner can use without the risk of their belongings or appliances being damaged. SprayFoam was installed on the rim joists and walls to insulate the area, keeping cold air out during the winter, making the space more comfortable, and saving the homeowner money on their energy bill. Finishing out the full waterproofing system was the installation of a SaniDry Sedona dehumidifier. The SaniDry Sedona drains directly to the TripleSafe, which allows the basement to be kept at a safe humidity level all of the time without the homeowner having to empty a bucket of water to keep it running.

The homeowner has now gained control over their basement, and their home is healthier than it has been in years, and the space can be used as the homeowner would like.

A homeowner in Old Town, ME, reached out to TC Hafford Basement Systems to address cold drafts coming through the floor of their indoor porch. They wanted a solution that would improve comfort without disrupting the appearance of the space. Our team conducted a thorough assessment and determined that Dr. Energy Saver spray foam insulation would be the perfect fit for the job. We applied the spray foam to the underside of the porch flooring, creating a solid barrier to keep the cold out. After the installation, the homeowner noticed an immediate difference in temperature and was extremely pleased with how much warmer the space had become.

Dampness, rot, and rodents are not how you want to describe the conditions of your crawl space, but for this Hancock, ME homeowner, this is the reality. After owning the home for 15 years and looking to eventually make this their forever home, the homeowner called TC Hafford Basement Systems for help.

System Design Specialist Nima Farshid met with the homeowner and spent time in the crawl space to design a system that would meet the needs of the home and the expectations of the homeowner. This included removing the old insulation and debris so that the work could begin. CleanSpace with Drainage Matting was laid down to create an inorganic barrier that keeps the outside elements where they belong. Encapsulating the crawl space ensures that wind, moisture, and critters can’t cause damage to the home. Wanting to make sure the home stays energy efficient, Spray Foam was installed to seal and insulate the area. Finally, a CleanSpace Vent Cover was installed to fully encapsulate the crawl space.

The homeowner can rest easy knowing their home is protected from the elements and is more energy efficient, saving them money on their energy bill in the future.

High moisture plagued this Paris, ME crawlspace, and concerned about mold growing, the homeowner reached out to TC Hafford Basement Systems for help. System Design Specialist Sam Crowley met with the homeowner and worked with them to design a system that would encapsulate their crawlspace and protect their home from moisture.

CleanSpace with Drainage Matting was installed to create an inorganic barrier between the outside elements and keep moisture and critters out. CleanSpace is attached to the rim joist with Spray Foam to ensure a complete seal. SmartJacks were installed to replace rusting and deteriorating supports to keep the floor above stable and remove any bounce that the floors once had. A SaniDry Sedona dehumidifier was installed to keep humidity at safe levels and connected to a Condensate Pump so the homeowner never has to worry about draining a bucket of water. Finally, a Smart Sump Liner was installed so a sump pump can be easily added in the future if the homeowner decides to. Now that the homeowner’s crawlspace is encapsulated, their goal of protecting their home is achieved, and they now have a safe area for storage.

With a large crack running along their garage floor due to uneven footing beneath, this homeowner was looking to redo their slab. After calling our office staff at TC Hafford Basement Systems and receiving their free estimate, this homeowner hired us to get the job done. Our crew got started by excavating the damaged area of concrete to pour a fresh slab. Once dried in place, PolyLevel was injected through the slab to fill any gaps below with expanding foam. This will create a level platform to hold the slab in place, eliminating any uneven terrain below that might lead to future cracking.

With a new garage slab in place supported by a PolyLevel injection, this homeowner's garage floor will remain flush with their driveway and crack free for many years to come!