Before & After Photos

In this damp basement in Port Deposit, MD the cement walls were leaking with moisture and then over time sitting on the floor of the basement. We dug a trench along the perimeter of the floor where the moisture was coming in, to install our WaterGuard French Drain. This drain system will collect the water from the floor joint, redirect it to the sump chamber, and safely pumps out the water.

A homeowner in Port Deposit, MD, began noticing increasing water intrusion in their basement, primarily due to an old window that allowed moisture to seep in, creating damp conditions and musty odors. Concerned about potential mold growth and structural damage, they reached out to Quality 1st for a lasting solution.

After a thorough inspection, our team developed a tailored waterproofing plan to address the root cause of the problem. We installed our patented WaterGuard Drainage System to efficiently manage water flow, paired with our TripleSafe Sump Pump to ensure reliable water removal. To eliminate the source of moisture, we replaced the old window with an energy-efficient EverLast Window, and added our SunHouse Window Well Enclosure to protect the area from debris and water accumulation.

With these advanced solutions in place, we successfully restored the basement to a dry, healthy environment, providing the homeowner with peace of mind against further water seepage issues!

This customer had a humidity issue in the basement. We installed our BrightWall vapor barrier and our SaniDry Sedona dehumidifier. Now, not only is the humidity under control, but the walls look cleaner and brighter.

This owner called us and was in need of repairing some concrete and a wall system installation to help with wall leakage. We cut the bottom of the walls to be able to install our CleanSpace Vapor barrier, which is placed and sealed flush against the perimeter walls. This vapor barrier prevents the evaporation from ground moisture that would pull up and into the home. The barrier is puncture-resistant, making it effective and durable over time. 

In order to put this property on the market, the customer had to take care of the horizontal crack on the foundation wall. The solution for this foundation repair was our Carbon Armor Wall reinforcement system. 

We used 12 Carbon Fiber strips, made from fiber-reinforced polymer that's 10 times stronger than steel, to strengthen and stabilize foundation walls that are bowed or cracked. We also used our ArmorLock system, which stops inward wall movement by connecting the CarbonArmor fiber strips to the home's perimeter framing.