Before & After Photos

An Eatontown, NJ homeowner found water seeping into their basement, so they contacted Quality 1st Basement System for a preventative solution. We installed the WaterGuard French Drain and TripleSafe Sump Pump System; both are designed to collect water seeping into the basement and pump it outside of the home. Since the installation, the homeowner has not experienced any other water issues in their basement.

Service Technician: Andrew F.

Foreman: Heriberto C.

A homeowner in Tinton Falls, NJ, reached out to address their damp basement after dealing with persistent water intrusion. Their main concern was the outdated sump pump system. We installed our TripleSafe Sump Pump System and WaterGuard French Drain System, resulting in a dry and healthy basement, now shielded against water seepage. Thanks to our System Design Specialist, Anthony, the homeowner can enjoy a dry and healthy basement without water worries. 

This Fair Lawn, NJ home had a leaking basement. The water was coming in through the walls as well as the floor joints. Quality 1st Basement Systems installed BrightWall on the basement to stop the water from seeping in through the concrete. A TripleSafe battery backup sump pump was installed to pump the water from the WaterGuard basement drain system out of the basement.

This Fair Lawn homeowner needed their old basement windows replaced. Quality 1st Basement Systems installed EverLast basement windows, which have heavy-duty vinyl frames. Old basement windows may cause drafts, but the EverLast windows stand up to harsh weather and have no air leaks. Now this homeowner will save on their heating bill, because EverLast windows feature insulated glass. They will never need to be sanded or repainted, will never rust or rot, and will always look beautiful.

 Jeff, our Concrete Repair Specialists, provided the homeowner with an estimate to lift, level & seal the area. Iian, our PolyLevel Foreman and his team were able to raise the slabs back to level. First the crew did a full walk through to make sure nothing was in the surrounding area that could delay or effect the installation. Once the area was clear, the crew began installing the polyurethane foam. Small holes were drilling into each sinking slab. PolyLevel is injected beneath the slab to fill the small void below. PolyLevel expands underneath, raising the heavy slab. When the slab is raised and no additional foam is needed, it begins to harden for permanent stabilization.