Click on a photo to enlarge.
Dee had begun to notice a downward slope in her sidewalk, making it difficult to access her front stoop. She knew she needed to fix the issue before it became worse, and contacted the experts at MidAmerica Basement Systems. Cole offered her an injection technology solution that was far more advanced than typical mudjacking. The polymer solution is injected under the concrete to fill the void, and then expands to lift and stabilize the slab. The high-density foam offers a lifting strength up to 4,000 pounds per square foot, making it effortlessly to level the sidewalk. The quick cure time of PolyLevel also allows for Dee to access the area within minutes of injection, unlike typical mudjacking which can take several days, even weeks to properly cure.
Homeowner Tom has lived in his home for the last years. He noticed over time that the concrete was sinking and cracking. They decided to seek professional advice and learn more about the polyurethane foam is injected under the driveways concrete slab to fill the void under the slab. The foam hardens and expands filling the void and liting the slab.
Sinking driveway repaired with polyfoam.
PolyLevel injections can help lift sunken concrete slabs, leveling them back to their original state. Small dime-sized holes are drilled into the concrete, poly ports are then placed along the holes. Polymers are injected into the ports, mixing with a reactive resin, to expand and fill the voids. After all voids are filled, PolyLevel lifts the concrete, precisely leveling the slabs. The lightweight material offers less stress on the ground underneath the slabs, preventing future sinking. PolyLevel can help repair all types of sinking concrete: driveways, sidewalks, patios and pool decks, stoops, porches, concrete steps, interior floor slabs, and additions.
Carl was concerned for his neighbors who take their daily walks around the block because of the uneven sidewalk in front of his home. He thought about having the concrete re-poured but realized it could take weeks on end to tear it up and repour the sidewalk. He reached out to MidAmerica Basement Systems to see what kind of solution they had to offer. Cole introduced Carl to PolyLevel. PolyLevel is made of high-density polymers that are injected under the slabs to lift and level the concrete. The quick reaction times allows for the slabs to be level once again in minutes, providing the permanent stabilization they need. PolyLevel also has a quick cure time that allows for the sidewalk to be accessed within minutes after application, so Carl’s neighbors can continue their walks without the worry of tripping hazards.